Ingersoll-Rand PD10E-X-X - Manual (Page 7)

PD10E-X-X (en) Page 7 of 8 Page 7 of 8
TORQUE REQUIREMENTS
ALL FASTENERS ARE METRIC.
LUBRICATION / SEALANTS
Apply anti-seize compound to threads at assembly.
Apply Lubriplate FML-2 grease to “O" rings, ”U" Cups & mating parts.
NOTE: DO NOT OVERTIGHTEN FASTENERS.
Torque (105 and 134) screw to 35 - 40 in. lbs (4.0 - 4.5 Nm).
A 637395-7 replacement Major Valve Service Assembly is available separately, which includes the following:
105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140, 141, 166, 176 (2), 200, 233 and 236 (4)
Figure 3
168
111
139
138
134
135
133
174
121
118
173
169
172
171
170
167
121
174
118
166
132
141 140
200
233
176
PILOT VALVE
PART GROUP
MAJOR
VALVE
101 181 103 201
173
136
107
105
236
137
107
Insert screwdriver here to remove (233) adapter plate.
Notch
43
PARTS LIST / PD10E-X-X AIR SECTION