IronPort Systems 4108GL - Manual (Page 145)

8-15
Time Protocols
TimeP: Viewing, Selecting, and Configuring
Ti
m
e
P
ro
toco
ls
Figure 8-12. The System Information Screen (Default Values)
2. Press [E] (for Edit ). The cursor moves to the System Name field.
3. Use
[v] to move the cursor to the
Time Sync Method field.
4. If TIMEP is not already selected, use the Space bar to select TIMEP , then
press
[v] once to display and move to the
TimeP Mode field.
5. Do one of the following:
• Use the Space bar to select the DHCP mode, then press
[v] to move
the cursor to the Poll Interval field, and go to step 6.
• Use the Space bar to select the Manual mode.
i. Press
[>] to move the cursor to the
Server Address field.
ii. Enter the IP address of the TimeP server you want the switch to
use for time synchronization.
Time Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None