IronPort Systems 4108GL User Manual
Page 81
4-25
Using the HP Web Browser Interface
Status Reporting Features
Usin
g
th
e HP
Web
Bro
w
ser
In
te
rfa
c
e
■
High Sensitivity.
This policy directs the switch to send all alerts to the
Alert Log. This setting is most effective on networks that have none or
few problems.
■
Medium Sensitivity.
This policy directs the switch to send alerts related
to network problems to the Alert Log. If you want to be notified of
problems which cause a noticeable slowdown on the network, use this
setting.
■
Low Sensitivity.
This policy directs the switch to send only the most
severe alerts to the Alert Log. This policy is most effective on a network
that normally has a lot of problems and you want to be informed of only
the most severe ones.
■
Never.
Disables the Alert Log and transmission of alerts (traps) to the
management server (in cases where a network management tool such as
HP TopTools for Hubs & Switches is in use). Use this option when you
don’t want to use the Alert Log.
The Fault Detection Window also contains three Change Control Buttons:
■
Apply Changes.
This button stores the settings you have selected for all
future sessions with the web browser interface until you decide to change
them.
■
Clear Changes.
This button removes your settings and returns the
settings for the list box to the level it was at in the last saved detection-
setting session.
■
Reset to Default Settings.
This button reverts the policy setting to
Medium Sensitivity for Log Network Problems.