IBM P5 570 - Manual (Page 20)

8 p5-570 Technical Overview and Introduction
The drawer has the following attributes:
4U rack-mount enclosure that can host one or two D10 drawers
Six adapter slots
– Five PCI-X slots: 3.3 V, keyed, 133 MHz blind-swap hot-plug
– One PCI slot: 5 V, keyed, 33 MHz blind-swap hot-plug
Default redundant hot-plug power and cooling devices
Two RIO-2 and two SPCN ports
7311 Model D10 I/O drawer physical package
Because the 7311 Model D10 I/O drawer must be mounted into the rack enclosure (FC 7311),
these are the physical characteristics of one I/O drawer or two I/O drawers side-by-side:
One 7311 Model D10 I/O drawer
– Width: 223 mm (8.8 in)
– Depth: 711 mm (28.0 in)
– Height: 175 mm (6.9 in)
– Weight: 19.6 kg (43 lb)
Two I/O drawers in a 7311 rack-mounted enclosure have the following characteristics:
– Width: 445 mm (17.5 in)
– Depth: 711 mm (28.0 in)
– Height: 175 mm (6.9 in)
– Weight: 39.1 kg (86 lb)
Figure 1-2 on page 8 shows the different views of the 7311 Model D10 I/O drawer.
Figure 1-2 7311-D10 I/O drawer views
Note: The 7311 Model D10 I/O drawers require FC 6431 to ensure RIO-2 port capability,
or an upgrade to RIO-2 is requested to support the connection to the p5-570 system.
Front view
Two redundant
power supplies
Slots: 1 2 3 4 5 6
RIO Card
Two I/O drawers
side by side
SPCN Ports
Rack
Indicator
Port
Rear view