IronPort Systems ZyAIR B-4000 User Manual
Page 185
ZyAIR B-4000 Hot Spot Gateway
Configuration, Firmware and Accounting Log Maintenance 20-5
20.2.3 Restore Configuration Using HTTP
This section shows you how to upload a new or previously saved configuration file from your computer to
your ZyAIR.
This function erases the current configuration before restoring a previous back
up configuration; please do not attempt to restore unless you have a backup
configuration file stored on disk.
Step 1.
Click SYSTEM TOOLS and CONFIGURATION. A screen displays as shown next.
Figure 20-6 CONFIGURATION: Restore Using HTTP
Step 2.
Specify the location and filename of a configuration file in the Local PC File Path field or
click Browse.
Step 3.
Click Apply to start the configuration restore process. The ZyAIR automatically restarts after
the restoration process is complete.