Restarting the zyair, Logging out of the web configurator, 8 restarting the zyair – IronPort Systems ZyAIR B-4000 User Manual
Page 41: 9 logging out of the web configurator
Advertising
ZyAIR B-4000 Hot Spot Gateway
The Web Configurator 2-13
2.8 Restarting the ZyAIR
You must restart the ZyAIR every time you change the system IP address or upload a firmware or
configuration file.
Click SYSTEM TOOLS, RESTART and then Apply.
Figure 2-9 Restart
When the ZyAIR restarts, all connections will be terminated. Anyone using a
system account will need to log in again. The subscribers may also need to log in
again.
2.9 Logging Out of the Web Configurator
Click LOGOUT to exit from the web configurator.
Figure 2-10 Logging Out
Advertising