IronPort Systems ZyAIR B-4000 - Manual (Page 208)

ZyAIR B-4000 Hot Spot Gateway
23-4 Troubleshooting
Table 23-7 Troubleshooting the Statement Printer
STEPS CORRECTIVE ACTION
1 Make sure the statement printer is connected to a power source and is turned on.
2 Check that the statement printer is connected to the port labeled DEVICE PORT.
3 Make sure there is enough printing paper in the statement printer.
4 Make sure you set the ZyAIR to require authentication before allowing Internet access, see
the Wizard Setup screens or the Authentication chapter.