IBM Motherboard DJ800 - Manual (Page 43)

Chapter 4
4-3
Using the BIOS Setup Utility
Navigating through the BIOS Setup Utility is straightforward. Use
the arrow keys to highlight items, press <Enter> to select items in menus,
and press <Esc> to quit. The following table provides more details about
how to navigate in the Setup program using the keyboard.
Up Arrow Key Move to the previous item
Down Arrow Key Move to the next item
Left Arrow Key Move to the previous menu
Right Arrow Key Move to the next menu
<Esc> key In the Submenu: Exit the submenu.
In the BIOS main menu: Jump to the Exit Menu
<Enter> Key Select the highlighted item. When available, a
pop-up list will display for you to select the item
value or select a submenu
<PgUp> Key Previous page on Scrollable menus or Jump to
the first interactive item listed
<PgDn> Key Next page on Scrollable menus or Jump to the
last interactive item listed
<F1> Key General Help on Setup navigation keys.
<F2>/<F3> Key Change Colors
<F7> Key Discard Changes
<F8> Key Load Failsafe Defaults
<F9> Key Load Optimal Defaults
<F10> Key Save and Exit
Home Go to Top of Screen
END Go to Bottom of Screen
ESC Exit