ICP DAS USA 8KE8 - Manual (Page 31)

Step1: Wire the 8430/8830/8KE4/8KE8 and configure its network settings (IP, Mask,
Gateway)
Step2: Create a virtual COM port (for example: COM3) to map the I/O modules
Step3: Install the DCON Utililty by running
CD:\Napdos\Driver\DCON_Utility\Setup\setup.exe and then run it.
3.1
4.1
4.2
4.3
8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10 ----- 31