Intel MB935 User Manual
Page 27
BIOS SETUP
MB935 User’s Manual
23
Time
The time format is:
Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn>
or +/- keys to set the current time.
IDE Channel Master/Slave
ICH9 supports 4 Serial ATA connectors; ITE controller support 1 CF
and 1 IDE connectors.
The onboard Serial ATA connectors provide Primary and Secondary
channels for connecting up to four Serial ATA hard disks . Each channel
can support up to two hard disks; the first is the “Master” and the second
is the “Slave”.
Press <Enter> to configure the hard disk. The selections include Auto,
Manual, and None. Select ‘Manual’ to define the drive information
manually. You will be asked to enter the following items.
Capacity :
Capacity/size of the hard disk drive
Cylinder :
Number of cylinders
Head :
Number of read/write heads
Precomp :
Write precompensation
Landing Zone : Landing zone
Sector :
Number of sectors
The Access Mode selections are as follows:
CHS
(HD < 528MB)
LBA
(HD > 528MB and supports Logical Block Addressing)
Large
(for MS-DOS only)
Auto