Intel MB935 - Manual (Page 45)

DRIVERS INSTALLATION
MB935 User’s Manual 41
Drivers Installation
This section describes the installation procedures for software and
drivers under the Windows 98SE, Windows ME, Windows 2000 and
Windows XP. The software and drivers are included with the
motherboard. If you find the items missing, please contact the vendor
where you made the purchase. The contents of this section include the
following:
Intel Chipset Device Software Installation ................................ 42
VGA Drivers Installation ........................................................... 45
IDE Controller Drivers Installation ............................................ 48
Intel PRO LAN Drivers Installation .......................................... 50
IMPORTANT NOTE:
After installing your Windows operating system (Windows
98SE/ME/2000/XP), you must install first the Intel Chipset Software
Installation Utility before proceeding with the drivers installation.
When IDE Device (HDD, CDROM, etc.) is to be used, one must use a
USB-FDD device (with the IDE device driver floppy diskette inserted) to
install the drivers when Windows is initializing. When Windows is
starting, press F6 and follow the proceeding instructions. The IDE
device drivers can be found in the driver DVD disc that is provided with
the motherboard with location in D:\SCSI\ITE8211\DISK\ (assuming D:
is the DVD ROM drive).