Ironman Fitness Transition Recumbent Bike IM-R7 - Manual (Page 10)

www.ironmanfitness.com
10 Important Information Assembly
ASSEMBLY FOR UPRIGHT POST
Step 1:
Insert the upright post cover (I) to the upright post (D) from the
bottom side.
Step 2:
Connect the lower pulse wire (A4) with the upper pulse wire
(A33). Also, connect the lower sensor wire (A36) with the upper
sensor wire (A34).
Step 3:
Attach upright post (D) to the front main frame (A1). Secure with
4 allen screws (N1), 4 spring washers (N2) and 4 flat washers
(N3).
Step 4:
Slide the upright tube cover (D) down to conceal tube connection.
4
A1
I
D
N1
N2 N3
A33 A34
A4
A36
I
Note:
Be careful not to pinch the sensor wire connection
during assembly.
Use Tool
6mm