Ironman Fitness Transition Recumbent Bike IM-R7 - Manual (Page 9)

www.ironmanfitness.com
Important Information 9
A1
A2
N1
N2
N3
A3
A4
Assembly
3
ASSEMBLY FOR FRONT & REAR MAIN FRAME
Step 1:
Connect the front (A4) and rear (A3) pulse wires together.
Step 2:
Attach front (A1) and rear (A2) main frames together, mak-
ing sure all wires are lined up correctly so that they are not
pinched when assembling the two frames together. Then,
secure them using 6 allen screws (N1), 6 spring washers
(N2) and 6 flat washers (N3).
Use Tool
6mm