Ironman Fitness Transition Recumbent Bike IM-R7 - Manual (Page 8)

www.ironmanfitness.com
8
A2
N4
C
C1
N2
N3
Assembly
ASSEMBLY FOR REAR STABILIZER
Secure the rear stabilizer (C) to the rear main frame
(A2) using two screws (N4), 2 spring washers (N2)
and 2 flat washers (N3).
Note:
After you finish the assembly for front and rear
stabilizer bars in order to add stability to the
unit, you may need to adjust the levelers that
are located on the bottom of the unit.
Use Tool
6mm