IBM EasyCoder 3400e - Manual (Page 74)

EasyCoder 3400e Bar Code Label Printer User’s Manual HelvC NugFont
C 39
5-4
To adjust the bias adjust screw
1. Remove the media cover and locate the bias adjust screw.
Po we r
Interm
ec
Intermec
3400
Ale rt
Fe ed /P au se
Em pty /P au se
3XXXU.038
Bias adjust
screw
2. To compensate for uneven print quality, turn the bias adjust screw as shown.
Adjusting the bias adjust screw causes the printhead to rest evenly on the drive
roller and results in even print quality.
3XXXU.039
A R E
If printing is light on the
right side of label, turn the
bias adjust screw counterclockwise. If printing is light on
the left side of label, turn
the bias adjust screw clockwise.
A R E
3. Replace the media cover.