Integra CROMA24 - Manual (Page 67)

Maintenance 67
MAINTENANCE
Croma24 Service Manual
The Manufacturing Submenu (Figure 3-22) consists of two proce-
dures:
Print Quality Test
Deadband
The procedures are primarily used in the manufacturing process
and is adjusted correctly before it leaves the plant. They are also
available to the field technician in case such adjustments are
required to be performed again.
Print Quality Test
The Print Quality Test prints an imbedded 24” RTL graphic that
allows the technician to get a general idea how well the printer is
operating. The graphic depicts a series of triangles of different
colors. This test is primarily used to identify if banding is present.
Deadband
Figure 3-23. Deadband Options Menu.
The Deadband calibration (Figure 3-23) consists of four tests:
Slow Deadband Test
Fast Deadband Test
Single Line Test
All Line Test