DSS Networks 5262-SC - Manual (Page 12)

GigMAC-PMC and PCI
GigPMC Switch
Board and Driver Users Manual
DSS NETWORKS, INC. Version: 2.6 Page: 12
6.2 BOARD LED INDICATORS
PCI / PMC Boards LED Function Table
Gigabit NIC
Model
LED # 1
Green LED # 2
Green LED #3
Yellow LED #4
Yellow
PCI-X 6267 TX RX LINK N/A
PMC 5468 LNK/ACT LNK/ACT LNK/ACT LNK/ACT
PMC 5164 LNK/ACT LNK/ACT LNK/ACT LNK/ACT
PMC 5264 LNK/ACT LNK/ACT LNK/ACT LNK/ACT
PMC 5262 TX RX LINK FD
PCI-X 6162 TX RX LINK FD
PCIe 6468 TBD TBD TBD TBD
Model 6267-SFP
The front panel has onboard pluggable SFP fiber optic connectors that support fiber
optic cabling using 50 or 62.5 micron multimode fiber with LC type connectors. An RJ-
45 type 1000 Base T SFP connector is also available for this model. There are 3 LED
indicators per port that provide the following as marked with silkscreen nomenclature on
front panels:
‰ LED_LINK (link)
‰ LED_TX (transmit)
‰ LED_RX (receive)
Link “LNK” Indicator
On solid green to indicate auto-negotiation complete and MAC and driver level link is
up.
Transmit and Receive Activity Indicators
Transmit and Receive LEDs are solid or blinking yellow
to indicate activity on the link (blinking shows tx and rx activity).
Model 5262-RJ dual-port or 5261-RJ single port PMC (copper)
The front panel has two onboard RJ-45 connectors that supports the connection of
Category 5e cabling with 4 LED indicators per port that provide the following as marked
with silkscreen nomenclature on front panels:
‰ LED_1000 (1000 Mb mod)
‰ LED_FD (full-duplex mode)