DSS Networks 5262-SC - Manual (Page 24)

GigMAC-PMC and PCI
GigPMC Switch
Board and Driver Users Manual
DSS NETWORKS, INC. Version: 2.6 Page: 24
6.7 ETHERNET FRAME LATENCY
The following table shows typical system level frame latencies measured during high-
performance testing using frame generator including path from SDRAM to wire through
system controller across PCI bus interface:
Frame size (bytes)
Typical latency
(microseconds)
60 – 100 < 2
500 4
1000 8
1500 12
7. POWER CONSUMPTION SPECS
PCI-X & PMC Boards Power Consumption Table
Card Model
3.3V Source
Current I (mA, A)
Power (Watts)
PMC 5261 900 2.97
PMC 5262 1.17 3.86
PMC 5263 1.17 3.86
PCI-X 6162 1.17 3.86
PCI-X 6267 1.17 3.86
PMC 5164 2.34 7.90
PMC 5264 2.34 (est) 7.90 (est)
PMC 5468 1.93 6.40
PCIe 6468 1.93 (est) 6.40 (est)
8. HARDWARE INSTALLATION
Before attempting to install the card into your system, please make sure of the following:
Shut off the power to the computer and any peripherals. It is important to remove the
power cable to the computer to reduce the possibility of residual power remaining in
the power supply.
Ground yourself. Many electronic components inside computer and on the card can be
severely damaged by receiving a shock of static electricity. Before touching any
electronic components or boards, discharge any static electricity on your body by
touching the bare metal case around the power supply inside your computer. Avoid
excessive movement during the installation, such as walking across carpets, as this can