Model 5263-sfp dual-port (fiber, copper) – DSS Networks 5262-SC User Manual
Page 13
GigMAC-PMC and PCI
GigPMC Switch
Board and Driver Users Manual
DSS NETWORKS, INC.
Version: 2.6
Page: 13
LED_TX
(transmit activity)
LED_RX (receive
activity)
Model 5262-LC dual-port or 5261-LC single port PMC (fiber)
The front panel has two onboard fiber LC connectors that support the connection of
singlemode or multimode fiber optics with 4 LED indicators per port that provide the
following as marked with silkscreen nomenclature on front panels:
LED_1000 (1000 Mb mod)
LED_FD (full-duplex
mode)
LED_TX
(transmit activity)
LED_RX (receive
activity)
Model 5263-SFP dual-port (fiber, copper)
The front panel has two onboard SFP connectors that support the connection of
singlemode or multimode fiber optics or 1000-Base T transceivers with 4 LED indicators
per port that provide the following as marked with silkscreen nomenclature on front
panels:
LED_1000 (1000 Mb mod)
LED_FD (full-duplex
mode)
LED_TX
(transmit activity)
LED_RX (receive
activity)
Model 5164/5264 quad-port PMC with RJ-45 connector(s)
The front panel has four onboard RJ-45 connectors that support the connection of
Category 5e cabling with 1 LED indicator per port that provides both a “link” and
“activity” indicator as follows:
OFF
(no
link)
ON
(link)
BLINKING
(link and activity)
Model 5468 GigPMC Switch with 4-port RJ-45 connector(s)