Intel ISP1100 User Manual
Page 61
Configuration Software and Utilities
61
Table 21.
Boot Menu (continued)
Feature
Options
Description
After Power
Failure
Stays Off
Last State (default)
Power On
Determines the mode of operation if a power loss
occurs. “Stays Off” keeps system off once power is
restored. “Power On” boots the system after power is
restored. “Last State” restores the system to the same
state it was in before the power failed.
On Modem
Ring
Stay Off (default)
Power On
APM Mode only: Determines the action of the system
when the system power is off and the modem is ringing.
On LAN
Stay Off
Power On (default)
APM Mode only: Determines the action of the system
when a LAN wake up event occurs.
On PME
Stay Off (default)
Power On
APM Mode only: Determines the action of the system
when a PCI Power Management Enabled wake up
event occurs.
IDE Drive
Configuration
Primary Master IDE
1
st
IDE (default)
2
nd
IDE
3
rd
IDE
4
th
IDE
Primary Slave IDE
2
nd
IDE (default)
Secondary Master IDE
3
rd
IDE (default)
Secondary Slave IDE
4
th
IDE (default)
Configures the peripheral devices. Configurable options
for other IDE devices are similar to Primary Master IDE.
1
st
to 8-th Boot
Devices
ATAPI CD-ROM (default)
Floppy
IDE-HDD
Intel UNDI, PXE-2.0 (LAN 1)
Intel UNDI, PXE-2.0 (LAN 2)
ARMD-FDD
SCSI
Disabled
Configures the boot sequence from the available
devices.
IDE-HDD = Hard disk drive.
Intel UNDI, PXE-2.0 = Network boot using PXE.
ARMD-FDD = ATAPI removable device-floppy disk
drive.
SCSI = If a SCSI device is installed, it will appear as
one of the possible boot devices with the name of
device.