Intel ISP1100 - Manual (Page 63)

Configuration Software and Utilities 63
Exit Menu
The menu bar is shown below.
Main Advanced Security Boot
System
Management
Exit
Table 23 shows the Exit menu. This menu exits the Setup program – saving, discarding, and
loading default settings.
Table 23. Exit Menu
Feature Options Description
Exit Saving Changes No options Exits system Setup and saves your changes in CMOS.
Exit Discarding
Changes No options Exits system setup without saving your changes in CMOS.
Load Setup Defaults No options Loads setup defaults.
Load Custom
Defaults No options Loads custom defaults.
Save Custom
Defaults No options Save custom defaults.
Discard Changes No options Discards changes.
Upgrading the BIOS
Preparing for the Upgrade
Before you upgrade the BIOS, prepare for the upgrade by recording the current BIOS settings,
obtaining the upgrade utility, and making a copy of the current BIOS.
Recording the Current BIOS Settings
1. Boot the computer and press <F2> when you see the message:
Press <F2> Key if you want to run SETUP
2. Write down the current settings in the BIOS Setup program.
NOTE
Do not skip step 2. You will need these settings to configure your computer
at the end of the procedure.