Invacare 00-313 - Manual (Page 10)

In
vacar
e
®
T
arsys
® 2G P
o
w
e
r
Tilt and Recline Seating Systems
10
2G Tilt and Recline Specifications
Dimensions FWD RWD
Seat width* 16''-22'' 16''-22''
Seat depth 16''-22'' 16''-22''
Back height (cane) 20''-26'' 20''-26''
Overall width 25.25'' 24.75''
Overall length
(from headtube to active anti-tipper)
Short Long
With vent tray 37'' 38.5'' 41.5''
Without vent tray 34'' 31.5'' 34.5''
Overall height (to top of 22'' cane) 41.25'' 40.5''
Seat-to-floor height (based on 16'' depth)
At 0° 19.25'' 18.5''
At 5° 20.25'' 19.5''
Weight capacity – consumer
With vent tray 185 lb. / 285 lb. with HD pkg. 185 lb. / 285 lb. with HD pkg.
Without vent tray 250 lb. / 350 lb. with HD pkg. 250 lb. / 350 lb. with HD pkg.
Product weight
Without base 105 lb. 105 lb.
With base (not including batteries) 300 lb. 260 lb.
Electronics Standard Optional
2GT single toggle TAC
2GR TAC TRCM
2GTR TRCM n/a
Actual back material height
Tilt only Recline/VSR
Back height Curved ABS † Profile Curved ABS § Profile
20'' 16.25'' n/a 11.25'' n/a
21'' 17.25'' n/a 12.25'' n/a
22'' 18.25'' n/a 13.25'' n/a
23'' 19.25'' 16'' 14.25'' n/a
24'' 20.25'' 18'' 15.25'' n/a
25'' 21.25'' n/a 16.25'' 16''
* 23'' and 24'' available through special order.
† On the 2GT, there is a 3.75'' gap from the seat pan to the bottom of the back. This allows for the cushion and cannot be reduced.
§ On the 2GR and 2GTR, there is an 8.75'' gap from the seat pan to the bottom of the back cushion. This allows for 5'' of VSR movement
plus 3.75'' to the back-cane pivot point. This can be reduced by ordering a special longer back but will limit the VSR movement.
Overall Length
The following dimensions were measured from the front of the seat pan to the rear of the anti-tippers.
Seat Depths
Short Base 16" 17" 18" 19" 20"
GB motors with 2GT or 2GTR 29.25" 30.25" 30.25" 31.25" 32.25"
GB motors with 2GR 29.25" 30.25" 30.25" 31.25" 31.25"
4-Pole motors with 2GT or 2GTR 29.25" 29.25" 29.25" 30.25" 31.25"
4-Pole motors with 2GR 29.25" 29.25" 29.25" 30.25" 31.25"
Long Base 18" 19" 20" 21" 22"
GB motors with 2GT or 2GTR 33.25" 34.25" 34.25" 35.25" 36.25"
GB motors with 2GR 33.25" 34.25" 34.75" 35.75" 36.75"
4-Pole motors with 2GT or 2GTR 32.25" 33.25" 33.25" 34.25" 35.25"
4-Pole motors with 2GR 32.75" 33.75" 34.75" 35.75" 36.75"
The following dimensions need to be added to the above in order to obtain overall length for the various options on chair.
Option Add
Extended anti-tippers 4.5"
Extended anti-tippers and ventilator tray* 12"
Center Pivot Style Front Riggings
70NHD- 70˚ swingaway footrests 11.5"
70STAPER- 70˚ tapered footrests 10"
AT5544- Elevating legrests 15"
ELRPW- Powered elevating/articulating legrests 14.5"
Pin Style Front Riggings
PW93- swingaway footrests 14.5"
* Extended anti-tippers come standard with ventilator tray.