Invacare 00-313 - Manual (Page 16)

Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
Invacare,Arrow, Storm
Series and Tarsys are
registered trademarks and
Yes, you can., 2GT, 2GR,
2GTR, HexaFlex, Pronto,
Ranger X, Torque, MKIV and
TT design are trademarks of
Invacare Corporation.
Specifications are subject to
change without notification.
© 2002
Invacare Corporation
Form No. 00-313
Rev. 09/02
Technical Advice
Operating the 2G Tilt and Recline functions through MKIV ™ electronics
Tarsys 2GT ™ Power Tilt Seating System
Tarsys 2GR ™ Power Recline Seating System
Tarsys 2GTR ™ Power Tilt and Recline Seating System
FOR THE TARSYS 2GT TILT SYSTEM
The 2GT is a one-actuator system that comes with the single-function
toggle as the standard electronics. For operation through the driver
control or ability switches, upgrade to the TAC.
FOR THE TARSYS 2GR RECLINE SYSTEM
The 2GR has two actuators: one for recline and one for VSR (Power
Shear Reduction). The new TAC (two-actuator control) is standard on
the 2GR and allows operation of the recline and VSR through the 4-way
toggle, through the driver control, or with standard ability switches, with
no need for additional components.
Operation through the driver control requires programming of the
MKIV, while ability switches can be plugged directly in to the TAC’s
1 /
8
''
mono jacks. With either option, the 4-way toggle should still be used as
an attendant control and drive lockout indicator. If power-elevating
legrests are needed, you must upgrade to the TRCM.
FOR THE TARSYS 2GTR TILT AND RECLINE SYSTEM
The 2GTR is a multi-actuator system which can interface with tilt,
recline, VSR (Power Shear Reduction) and optional powered leg
actuators. The standard TRCM (Tilt Recline Control Module) permits
driver-control operation simply by programming the MKIV. The system
can also be operated through the 4-way toggle or any MKIV A-level
driver control, with no need for additional parts.
When the chair is operated through the driver control, the 4-way toggle
should be used as an attendant control and as a drive lockout indicator.
To control using standard ability switches, a switch adapter such as the
Tash CA5 or ASL 502 can be plugged in to the TRCM’s D-9 port,
allowing control of tilt/recline by up to 4 switches.
Tarsys 2G Tilt and Recline Specials *
Due to the nature of providing custom rehab products, we realize that at times your consumers may have needs outside of
our standard product offering. We can accommodate some of these custom configurations through our Specials Department.
Below are a few common specials. Please contact Invacare Customer Service for specific availability, pricing and lead times.
Specials number Product Application
SM-011203084006 2GR, 2GTR For consumers who require fuller back support, the VSR actuator can be limited in range to allow
the Curved ABS back to be made longer. (Provide actual length of ABS back needed. This will
reduce VSR travel from 5".)
C-010418024954 2GR, 2GTR For consumers who require full/custom back support, the VSR actuator can be removed and
round canes used to interface with aftermarket backs.
SM200109053220 2GT, 2GR, 2GTR To achieved widths of 23" or 24".
SM010524104826 2GT For consumers who require a round back cane height shorter than 20".
C-200410040947 PTO on Pronto
R2
For consumers who prefer the center-pivot style front riggings.
*May not be available with some configurations.
‘‘Invacare says ‘Yes, you can, ™ ’
and I couldn’t have said it
better myself.’’