Invacare 00-313 - Manual (Page 14)

In
vacar
e
®
T
arsys
® Ele
vating Seat f
o
r 3G Storm Series P
o
w
e
r
Wheelchairs
14
Specifications
Dimensions
Overall
Seat width 12" – 15",* 16" – 22" (1" increments)
Seat depth 12" – 15",* 16" – 22" (1" increments)
Length 45" with standard
front riggings
Width 25"seat <18"
Front seat-to-floor height**
Standard 19"
With PTO 20"
Consumer weight capacity
Standard 300 lb.
With PTO 250 lb.
*Elevating Set is available in Junior set sizes (12"-15") through specials. Elevating and PTO are not available in Junior
sizes.
** Measured w/ASBA seat at 0˚ tilt and 12" drive wheels.
FEATURES
• Assists in making transfers safer and easier as well as enhancing many
social/psychological experiences
• Provides up to 6 inches of vertical lift
• Low seat-to-floor height of 19 inches and 20 inches with PTO (optional) at 0
degrees of tilt
• Driving while elevated at an automatically reduced speed of 20% of the
maximum for added stability
• Raised and lowered through a toggle switch mounted to the seat armrest
(standard), or with TAC, through the joystick (optional–available with
MKIV
™ A electronics)
• Available with either ASBA or van seat
Fully elevated.
Fully elevated with with PTO at 20˚ of tilt.
Invacare ® Tarsys ® Elevating Seat for 3G Storm Series ®
Power Wheelchairs
Designed to provide consumers with improved independence and assistance to perform daily living
activities, such as transfer assistance or reaching for objects on shelves, the Tarsys
® Elevating Seat is
a long-awaited necessity. The Tarsys Elevating Seat is incorporated into the Invacare ® 3G Storm
Series ® power wheelchair bases (Arrow ® , Ranger X ™ and Torque ™ SP). In addition, the Elevating
Seat can be ordered with the Tarsys ® Power Tilt Only (PTO) powered seating system, providing a
multi-functional solution.