Invacare Deluxe Three-Position IH6065 series - Manual (Page 21)

SECTION 5—MAINTENANCE
Part No. 1141494 21 Invacare Mobile Recliners
SECTION 5— MAINTENANCE
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Replacing the Back Cushion
Model IH6074A and IH6065 series
NOTE: For this procedure, refer to FIGURE 5.1.
Removing
1. Remove the four long hex screws that secure the back cushion to the back frame.
2. Remove the four short hex screws that secure headrest bracket to the back cushion.
Repeat for remaining headrest bracket.
Installing
1. Align back cushion with the back frame.
2. Install four long hex screws to secure the back cushion to the back frame. Securely
tighten.
3. Secure the headrest bracket to the back cushion with four short hex screws.
4. Securely tighten. Repeat for remaining headrest bracket.
FIGURE 5.1 Replacing the Back Cushion - Model IH6074A and IH6065 series
Back Cushion
Headrest Bracket
Short Hex Screws
Long Hex
Screws
Back Frame