Intel SERVER BOARD SDS2 - Manual (Page 117)

Errata Listing Intel® Server Board SDS2
Revision 1.2
Order Number: A85874-002
106
13. Errata Listing
13.1 Summary Errata Table
The following tables indicate the errata and the document changes that apply to the Intel® Server
Board SDS2. Intel intends to fix some of the errata in a future stepping of components, and to
account for the other outstanding issues through documentation or specification changes as
noted. The tables use the following notations:
Fix: Intel intends to fix this erratum in a future release of the component.
Fixed: This erratum has been previously fixed.
NoFix: There are no plans to fix this erratum.
Table 91. Errata Summary
No. Plans Description of Errata
1. Fixed Intel® RAID controller SRCMR not yet supported with Intel® Server Board SDS2
2. Fixed Intel® Server Board SDS2 BIOS update utility does not allow updates from a PXE server or from
network drives
3. Fixed Intel® Server Board SDS2 FRU/SDR update fails with console redirection enabled in BIOS Setup
4. Fixed First characters and arrow keys not echoed with console redirection
5. Fixed Intel® & ICP Vortex* RAID Controllers will cause the Intel® Server Board SDS2 to halt during POST
when the BIOS Logo screen is enabled
6. Fixed Intel® Server Board SDS2 CD-ROM issues
7. Fixed NIC driver set 5.12 v.2.3.25 for UnixWare* 7.1.1 drops DPC LAN connection
8. Fixed NIC driver set 5.12 v.5.41.27 for Microsoft* Windows* 2000 prevents a DPC LAN connection when
the operating system is loaded
9. Fixed Extended RAM step disable option in BIOS Setup has no effect
10. Fixed High resolution video modes do not work correctly
11. Fixed Lower performance with CAS Latency 2 memory
12. Fixed SDS2 reboots during POST with 4GB or more of total system memory installed
13. Fixed Novell NetWare* v. 6.0 does not install on SDS2
14. Fixed Adaptec* 2100S RAID controller causes system lockup and video blanking
15. Fixed SDS2 Build Your Own (BYO) Platform Confidence Test (PCT) v. 1.00 fails on first test run
16. NoFix SDS2 0B71: System temperature out of the range POST message
17. Fixed SDS2 0B75: System Voltage out of the range POST message
18. Fixed Mixcellaneous numeric keys entered during POST will enable PXE boot
19. Fixed
Fab 5 SDS2 board level operating temperature and power supply voltage tolerance modification
20. Fixed
Fab 5 Recommendation for SDS2 rubber bumper installation i s on the base SC5200 Chassis