Intel SERVER BOARD SDS2 - Manual (Page 134)

Intel® Server Board SDS2 Errata Listing
Revision 1.2
Order Number: A85874-002
123
Status: Will Not Fix.
30. Can Not Change BIOS SETUP IDE Options Using <Enter> Key
Problem: In SETUP, when attempting to change any option under the Primary/Secondary
IDE controller sub-menu, one must use the space bar. The enter key does not
function. The TPS does not mention having to use the SPACE bar to change
the options
.
Implication: Possible confusion on how to select the options in the BIOS Setup IDE sub
menu.
Workaround: None.
Status: Will not fix.
31. Minimum Wait Time Between Power Off and Power On via
Front Panel Power Button Is One Second.
Problem: Minimum wait time between power off and power on using the front panel power
button on the SC5100 chassis is not documented.
Implication: System will not respond to the power button until one second has elapsed.
Workaround: Wait longer than one second when cycling the AC power via the front panel
power button.
Status: Will not fix.
32. Unable to boot Netware 6.0 (NW6) From CD ROM With Adaptec
Adaptor 2100S in Slot 6.
Problem: Unable to install or boot to NW6 from CD Rom with Adaptec SCSI Adaptor
2100S installed in Slot 6. NW6 requires SP1 updated drivers to be installed.
Implication: System hangs and fails to load drivers completely. Unable to boot to SSU floppy
if NW6 CD is installed in CD-ROM drive.
Workaround: Recommended installation methodology is to install from the Netware 6 SP1
Overlay CD. This CD installs Netware 6 with all the SP1 fixes already
incorporated.
The SP1 Overlay CD is available from
http://support.novell.com/filefinder/13659/index.html