Interlink electronic L485SIB - Manual (Page 20)

20
www.ultrachefgrills.com
7. Front Cabinet Support Installation
Fasten top rail assembly to the front of side panels using (4) #14 x 1/2” screws. For ease of installation start all screws
before tightening completely. Snap magnet into place as shown.
8. Heat Shield Installation
Attach heat shield above propane tank ring using (4) #14 x 1/2» screws. Attach one end under lip of back panel and other
end to underside of front cabinet support.
6. Tank Inhibitor Bracket / Propane Tank Mount Installation
Insert tank inhibitor bracket into slot in rear panel as illustrated. Fasten to bottom panel using (1) #14 x 1/2” screw. Clip top
propane tank mount into slots in back panel. Insert one end at a time, gently bending wire. (When not in use tank mount
will lay flat against back panel).
Propane Only
1 x N570-0080 (#14 x 1/2”) 3/8”(10mm)