Integra DPS-9.1 - Manual (Page 37)

37
DPS-9.1 US_E 29343004
Selecting the Playback Function
During playback, press QUICK.
The following on-screen display appears.
(The actual display will vary depending on the
playback status.)
e.g. DVD-V
Press / to select a desired item,
and press ENTER.
e.g. To change the repeat mode:
Press / to change the setting.
e.g. To select the chapter repeat mode:
Press ENTER.
The on-screen display disappears and
playback will resume according to your
selection.
Selecting the Playback
Function - QUICK
1
2
3
4
Memory
Memoy List
Repeat
Random
Bit Rate
Text
Exit
Quick
Memory
Memoy List
Repeat
Random
A-B (Set A)
Chapter
Title
All
Bit Rate
Text
Exit
Quick
Memory
Memoy List
Repeat
Random
A-B (Set A)
Chapter
Title
All
Bit Rate
Text
Exit
Quick
Pressing one button can display a list of playback
functions which are relevant to your current
playback mode. You can check and modify them
from the list.
VCD CD DVD-A DVD-V
Quick menu
For details, see the respective pages.
Memory : To program memory playback (see page 28).
Memory List : To list memory settings (see page 28).
Repeat : To select the repeat playback mode (see page 27).
Random : To select the random playback mode (see page 29).
Bit Rate : To activate/disable the bitrate display (see page 38).
Text : To activate/disable the Text display.
Text display:
Displays DVD-Text data or CD-Text data if
included on the disc.
With DVD-Audio, Album text data is displayed if it
is recorded on the disc. Track information is not
displayed.
(Some text content recorded on the disc may not be
displayed properly depending on the disc.)
Exit : To quit the on-screen display.
Note
Pressing QUICK again also exits the on-screen display.
DPS-9.1(US_E)p36-43.p651 10/11/00, 19:09 37