Integra DPS-9.1 - Manual (Page 57)

57
DPS-9.1 US_E 29343004
Number buttons [24, 28]
Use to enter numeric values.
SUBTTL button [33]
Press repeatedly to select one of the subtitle languages recorded on a
DVD-Video.
button [21]
Press to open and close the disc tray.
MENU button [18]
Press to display the DVD menu.
/ / / and ENTER multi control [18]
Use to navigate menu screens and enter settings.
SETUP button [18]
Press to display the Setup screen menu.
QUICK button [37]
Press to display the Quick list of functions relevant to the current
playback mode.
V.REMOTE button [36]
Press to display the Virtual Remote on the screen.
(skip forward) button [26]
Press to advance through titles, groups, chapters, or tracks.
(fast forward) button [22]
Press to scan rapidly forward through the contents on a disc.
SLOW button [22]
Press to perform slow forward playback of a DVD or Video CD.
PAUSE/STEP button [21]
Press to playback. Pressing repeatedly causes the still video image to be
advanced a single frame at a time.
DISPLAY/NAVI button [38]
Press to display the on-screen navigational.
MEMORY button [28]
Press to playback titles, chapters, or tracks in a specific order.
REPEAT button [27]
Press to repeat playback.
DNR button [31]
Press repeatedly to select one of the digital noise reduction processes
for a clearer video presentation.
A-B button [27]
Press to repeat a specific section on a disc.
SEARCH button [25]
Press to find the specific section on a disc where you want to start
playback.
Remote controller buttons that can be
used to control your Integra receiver
Press RECVR to set the remote controller to operate an Integra
receiver. The following buttons can be used to operate an Integra
receiver. Refer to the manual supplied with your receiver for
details on each function.
ON/STNBY buttons
Press ON to turn the receiver on and STNBY to put the receiver in
standby. Depending on the receiver, pressing ON may alternately turn
the receiver on and put it in standby.
RECVR button
Press to select the Receiver mode. In this mode, the remote controller is
set to control an Integra receiver.
Input selector buttons
Press to select the input. These buttons can be used in either DVD or
RECEIVER mode.
VOL / buttons
Press to adjust the volume. These buttons can be used in either DVD or
RECEIVER mode, and can also be programmed to adjust the volume of
other components.
MUTING button
Press to mute the audio output.
PRESET / buttons
Press to select the radio presets if the receiver has radio features.
DPS-9.1(US_E)p56-60.p65 10/11/00, 19:12 57