Installing the network interface card (nic) – iSimple Handheld PC 680/680e User Manual

Page 112

Advertising
background image

106 | HP Jornada 680/680e User’s Guide

• An account with your corporate network—includ-

ing an IP address for your HP Jornada, if it is not

dynamically assigned

• A network (LAN) connection—a network cable with

the appropriate connector for your NIC

Installing the network interface card (NIC)

Before you can connect directly to a network, you must

install an NIC and properly configure it with the IP

address of your DNS and WINS servers (check with your

network administrator for this information).

You must use an NIC to connect your HP Jornada directly

to a LAN. NICs are available from several manufacturers

as PC Card accessories. (For a list of recommended

PC Card NICs, go to the Hewlett-Packard Web site at

www.hp.com/jornada.) Install the PC Card NIC in the PC

Card slot on your HP Jornada, and then attach the net-

work cable according to the instructions provided by your

card manufacturer.

In addition to the PC Card NIC, you will need to install

the appropriate driver software to configure the NIC. Driv-

ers for Proxim 7400 and Socket LP-E LAN cards are in-

cluded on the HP Jornada. Drivers for other cards must be

obtained from the card manufacturer. Install software

drivers as you would any other third-party program. (For

more information, see the Installing programs section in

chapter 7.)

Establishing an account or guest privileges on the network

Contact your network administrator to set up an account

or guest privileges on the network. The network adminis-

trator will give you the information you need to log on to

the network just as you do with your desktop PC, includ-

ing user name, password, domain name, and IP address (if

applicable).

Advertising