iSimple Handheld PC 680/680e - Manual (Page 135)

Chapter 7 | Optimizing your HP Jornada | 129
To install a PC Card
1. Push the PC Card into the PC Card slot on the left
side of the unit. As the card is inserted, the expan-
sion module will extend slightly from the bottom of
the unit.
2. If you set your HP Jornada on a flat surface, such as
a table or desk, flip out the stabilizer to ensure it
remains level.
To remove a PC Card
1. Using your fingernail, pull out the PC Card eject tab,
so it extends out from the unit.
2. Push the PC Card eject tab into the unit to eject the
PC Card.
3. Release the PC Card eject tab and fold it flush with
the side of the unit.
4. Remove the PC Card. The expansion module will
recess back into the unit until it is flush with the
underside of the unit.