iSimple Handheld PC 680/680e User Manual

Page 136

Advertising
background image

130 | HP Jornada 680/680e User’s Guide

To install a CompactFlash Card

1. Press the latch-bar located at the opening of the

expansion module with your finger. The expansion

module will spring open.

2. Insert the CompactFlash Card by sliding it into the

expansion module along the glide rails.

3. Close the expansion module by pushing down until it

is flush with the underside of the unit. The expan-

sion module should lock in place. You will be able to

see the top edge of the card through the slit between

the expansion module and the unit.

If you have difficulty opening the expansion module, use your thumbs to apply pressure

at the base of the expansion module (near the backup battery compartment) while you

press the latch-bar.

To remove a CompactFlash Card

1. Press the latch-bar located at the opening of the

expansion module with your finger. The expansion

module will spring open.

2. Remove the CompactFlash Card. Insert your finger-

nail into the notch on the card to pull the card from

the unit.

Advertising