Intellinet Network Solutions 524957 - Manual (Page 36)

36
ROUTER SETUP
3.5.2 Port Triggering
The port trigger module dynamically registers virtual server rules when
any IP host generates the packet from the specified trigger protocol
and port. The port trigger module uses a forward protocol type and
port number, and uses the IP address of the host that generates the
trigger packet when it registers a rule.
Enabled: Select to enable/disable the function.
Trigger Port: Enter a range of ports.
Trigger Type: Select either “TCP” or “UDP” from the drop-down menu.
Public Port: Enter a range of ports.
Public Type: Select either “TCP” or “UDP” from the drop-down menu.
Comment: Enter any description of the configured trigger.
Add/Modify: Click to add/edit rules you’ve configured.
3.5.3 Port Mapping
This submenu/function allows you to set up public services on your