Infinite Peripherals IP-BC-BT - Manual (Page 5)

.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc. Page 4
www.ipcprint.com
IP-BC-BT User’s Manual v1.01
Installing & Replacing Batteries
Use only Alkaline batteries in your scanner. Be sure to remove the
batteries from the scanner when storing the scanner for more than 30
days.
Installation Steps:
1. Turn the scanner over so that the back
faces up.
2. Remove the battery cover by pressing
the button at the top of the cover, and
moving the cover down.
3. If there are batteries in the scanner,
remove them.
4. Insert the new batteries so that the
positive end (+) is up on the outside
batteries, and down on the middle
battery.
5. Replace the battery cover by inserting
the tabs at the top of the cover into
the slots in the back of the scanner.
Slide the cover up.
Figure 2