Infinite Peripherals IP-BC-BT - Manual (Page 8)

.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc. Page 7
www.ipcprint.com
IP-BC-BT User’s Manual v1.01
Scanning Operation
The IP-BC-BT Cordless Bluetooth ® Scanner operates from 3 AAA batteries
that will supply over 76,000 continuous scans or 100 scans/day for 8
months (16,000 scans). In order to conserve power the scanner enters
standby mode after a programmable a connect time of no activity and
drops the Bluetooth
® connection. The default connect time is 60 seconds.
When scanning, the device wakes up and the Bluetooth ® radio enters
Discovery mode and waits for the host to reconnect. When using the host
detects the scanner in discovery mode it quickly re-connects and
transmits the data.
Proper scanning of barcodes is shown in the figure below. Note that the
scan beam crosses the width of the barcode.
Scan beam crosses the width
of the barcode and extends
beyond the barcode left and
right edges.