Icom COMMUNICATION RECEIVER IC PCR100 - Manual (Page 14)

10
2
PANEL DESCRIPTION
■ Function display
q
MEMORY BANK INDICATOR (p. 23)
Indicates the memory bank number (and its name if it has
one) being received.
w MEMORY CHANNEL INDICATOR (p. 23)
Indicates the memory channel number (and its name if it
has one) being received.
• The name darkens when the receive frequency changes from the
stored one.
e
FREQUENCY INDICATION (p. 17)
Indicates the receive frequency and data as it is being
input such as memory channel numbers, etc.
r S (SIGNAL) METER (pgs. 16, 20)
Indicates the receive signal strength. Also indicates the
S-meter squelch receive level set via the [SQUELCH] con-
trol.
t
BAND SCOPE PAUSE INDICATOR [PAUSE] (p. 34)
Appears when pausing the band scope.
y
BUSY INDICATOR [BUSY]
Appears when receiving a signal or when signal noise
opens the squelch.
u RECEIVE MODE INDICATORS (p. 18)
Indicate the current receive mode.
• “WFM” lights in red when receiving a stereo broadcast program.
i
TUNING STEP INDICATOR (p. 18)
This is the frequency increment used when selecting a fre-
quency using the tuning dial and when searching for sig-
nals using a scan function.
o IF FILTER INDICATOR (p. 20)
Indicates the selected IF filter and signal passband width.
!0
ATTENUATOR INDICATOR [ATT] (p. 21)
Appears when the attenuator function is on.
e
q w
!2 !3 !7 !4 !4 !5 !6
u r
t
y
i
o
!0 !1