Programmed scan – Icom COMMUNICATION RECEIVER IC PCR100 User Manual
Page 31
27
5
SCAN OPERATION
■
Programmed scan
Programmed scan automatically searches for signals within
a specified frequency range.
For programmed scan, scan edges must be programmed
in advance. See the next section for details.
D
Using the multi-function receiver screen
q
Make sure the squelch is set to the threshold point. (closed
condition)
w
Click the [SET] button to call up the setting screen if it is
not displayed.
e
Click the [Program SCAN] tab to show the program list.
r
Select a programmed scan range to be scanned with the
mouse, then click the close ([
"
]) button.
t
Click the [PROG] button to start programmed scan.
• “PROG” flashes while scanning.
y
To cancel the scan, click [STOP] or [PROG].
• When the frequency is changed after cancelling a scan and a
new scan is activated, scan starts from the starting frequency of
the specified frequency range. When the frequency is not
changed, scan starts from the previously stopped frequency.
D
Using the simple function receiver screen
q
Make sure the squelch is set to the threshold point. (closed
condition)
w
Call up the setting screen if it is not displayed.
• Click the [MENU] button and select the ‘Function Setting (SET).’
• When the scan controller screen is in use, click the [SET] button
on the screen.
e
Click the [Program SCAN] tab to show the program list.
r
Select a programmed scan range to be scanned with the
mouse, then click the close ([
"
]) button.
t
Call up the scan controller screen if it is not displayed.
• Click the [MENU] button and select the ‘Scan Controller.’
y
Click the [PROG] button in the scan controller screen to
start programmed scan.
• “Program SCAN” flashes in the scan controller screen while
scanning.
u
To cancel the scan, click [STOP] or [PROG].
• When the frequency is changed after cancelling a scan and a
new scan is activated, scan starts from the starting frequency of
the specified frequency range. When the frequency is not
changed, scan starts from the previously stopped frequency.
[PROG]
[STOP]
[SET]