IBM EDR1600 - Manual (Page 51)

Administrator’s Guide and Operating Instructions
47
9. Remote Control
Through Local Network, Intranet, Internet or dial-in functions, users are
able to view the live video, image playback and upload/download the
configuration file of EDR 1600 from any PC in anywhere. The remote
computer does not need to have the EDR1600 software or any special
hardware and software installed.
Connecting the Remote PC and Server Connecting the Remote PC and Server
Before you start, please verify the connection between EDR1600 and the
, modem
or network. The procedure for configuring a remote PC
depends on the desired type of connection. The user can either dial directly
into the server through modem, or connect over a network.
You
must obtain IP addresses for the remote PC and EDR1600, please refer to
Chapter 6.15 System Configurations for the details.
Remote View Remote View
After the Remote PC and EDR1600 are connected, start your Web browser
and enter the system IP address in the Location/Address field.
(Note.1)
Example:
The main page will be shown on the screen, enter the appropriate Login
name and password, then click on the Submit button. (Note. 2)
The main control page will be shown as below.
The video image can be displayed in full or quad screen mode, and the
http:// 61.218.36.254