IBM EDR1600 - Manual (Page 56)

Administrator’s Guide and Operating Instructions
52
Video Format NTSC/EIA or PAL/CCIR, auto-sensing
Video Input 16 camera inputs with loop through (BNC), 1Vp-p/75ohm
Video Output
Main Monitor
1 D-SUB 15-pin computer monitor output
1 BNC composite video output, 1Vp-p/75ohm (option)
1 mini-din S-video output, 1Vp-p/75ohm (option)
Call Monitor 1 BNC composite video output, 1Vp-p/75ohm
Video Compression JPEG and MPEG-1 I Frame
Video Resolution 352x240 (NTSC) or 352x288 (PAL)
Video Display 1/4/7/9/10/13/16 video windows, 16 million colors
Display Resolution 640x480 for NTSC, 800x600 for PAL
Video Freeze Yes
Sequential Switch Programmable, with adjustable dwell time (5-100 seconds)
Alarm Input 24 inputs, Contact or TTL/CMOS signal, polarity selectable
Alarm Output 4 Normally Open, 4 Normally Closed relay outputs
Hard Disk Storage Up to 2 sets of Hard Disks, hot swappable
Hard Disk Extension Up to 16 sets of Hard Disks, hot swappable
Hard Disk Type IDE Type, 3.5” half height
Recording Rate
Up to 60 fps for NTSC, 50 fps for PAL, independent of
camera types
Recording Mode Time-lapse recording, Event recording
Playback Rate Up to 30 fps for NTSC, 25 fps for PAL
Playback Search Radar search, Thumbnail search, Time search
Motion Detection Yes, with configurable detection area (16x12) & sensitivity
Video Loss Detection Yes
Event Log Yes
User Interface Windows look and feel
Setup On screen setup
User Input Device Mouse (Keyboard: optional)
Buzzer Yes
Timer Built-in real time clock
Watch Dog Timer Yes
Title
10-character title generator for each camera, alarm input, and
alarm output
Flash Memory 8 MB
Security Multi-level password protection
System Recovery Auto power on after power loss recovery
Power Source 110V/220V AC, selectable
Power Consumption
150W Max.
Dimension 426(Width) x 480(Depth) x 176(Height)mm