Technical information – IBM POWER 730 User Manual
Page 27
IBM Europe, Middle East, and Africa Hardware
Announcement ZG10-0214
IBM is a registered trademark of International Business Machines Corporation
27
For details on available services, contact your IBM representative or visit
For details on available IBM Business Continuity and Recovery Services, contact your
IBM representative or visit
For details on education offerings related to specific products, visit
Select your country, and then select the product as the category.
Technical information
Specified operating environment
Physical specifications
Rack-Mount:
Width: 440 mm (19.0 in)
Depth: 706 mm (27.8 in)
Height: 89 mm (3.5 in)
Weight (Maximum configuration): Power 710 -- 28.2 kg (62 lbs)
Power 730 -- 29.5 kg (65 lbs)
Operating environment
• Temperature: (nonoperating) 5° to 45°C (41° to 113°F); recommended
temperature (operating) 18° to 27°C (64° to 80°F); allowable operating
temperature 5° to 35°C (41° to 95°F)
• Relative humidity: Nonoperating 8% to 80%; recommended 5.5°C (42°F) dew
point to 60% RH and 15°C (59°F) dew point
• Maximum dew point: 28°C (84°F)(operating)
• Operating voltage: 100 to 127 or 200 to 240 V ac (Power 710); 200 to 240 V ac
(Power 730);
• Operating frequency: 47/63 Hz
• Maximum measured power consumption:
– Power 710 -- 650 watts (maximum)
– Power 730 -- 1100 watts (maximum)
• Power factor: 0.98
• Thermal output:
– Power 710 -- 2,218 Btu/hour (maximum)
– Power 730 -- 3,754 Btu/hour (maximum)
• Power-source loading
– Power 710 -- 0.663 kVa (maximum configuration)
– Power 730 -- 1.122 kVa (maximum configuration)
– Maximum altitude: 3,050 m (10,000 ft)
Note: The maximum measured value is the worst case power consumption
expected from a fully populated server under an intensive workload. The maximum
measured value also accounts for component tolerance and non-ideal operating
conditions. Power consumption and heat load vary greatly by server configuration
and utilization. The IBM Systems Energy Estimator should be used to obtain a heat
output estimate based on a specific configuration