Panel description, Front panel – Icom MR-1000TTM User Manual

Page 6

Advertising

PANEL DESCRIPTION

■ Front panel

q POWER SWITCH [POWER]/[

] (p. 8)

Turns power ON and OFF.

• The standby screen appears for 90 sec. while warming

up the magnetron.

• The initial screen appears with a beep after the power

has been turned ON.

w TRANSMIT/SAVE SWITCH [TX (SAVE)]

]

➥Push to toggle between the TX mode and the

standby mode. (p. 9)

➥Push and hold for 1 sec. to turn the power save

function ON. The radar for TX interval scan is
fixed at 10 revolutions. (p. 12)

• Select the save time in INT. SETTING menu.

e RANGE UP/ DOWN SWITCHES [+]/[–]

]/[

] (p. 9)

Push [+] to increase the screen range.
Push [–] to decrease the screen range.

r UP, DOWN, LEFT, RIGHT KEYS [Щ

Щ Ъ

Ω

Ω ≈

≈

]]

Set the EBLs, VRMs, alarm area, ATA target, etc.
according to the key pushed.
Use the [Щ

Щ] [Ъ

Ъ] to select menu item and [

Ω

] [

≈

] to

set the item.
Using the [Щ

Ω

]/[Щ

≈

] or [Ъ

Ω

]/[Ъ

≈

] combination

allows you to move the cross line cursor to the
upper (or lower) left or right.

t TRAILS SWITCH [TRAILS]/[

] (p. 12)

Push to toggle the trail function ON and OFF. This is
useful for watching other ship’s tracks, approx. rela-
tive speed etc.

• Trail Time can be set in VIDEO menu.

y ZOOM FUNCTION [ZOOM]/[

] (p. 11)

Push [TARGET]/[

] and [TRAILS]/[

] si-

multaneously to toggle the ZOOM function ON and
OFF. ZOOM function expands the target to 2 times
normal.

• Move the cursor to the target, then turn the function ON.
• The screen zooms around the middle of the cursor and

own ship.

• This function is not available on

⁄

and 32 NM or above

ranges.

u MODE SWITCH [MODE]/[

]

Push to select one of Head-up (H UP), Course-up
(C UP), North-up (N UP) or True motion (TM)
screens.

• The North-up and Course-up screens can be selected

only when a bearing data format is connected. (p. 39)

• TM screen requires bearing data and LOG or position

data. (p. 39)

• TM screen is not available at 32 NM or above range.

i OFF CENTER FUNCTION [OFF CENT]/[

]

(p. 10)
Push [ALM]/[

] and [MODE]/[

] simulta-

neously to turn the OFF CENTER function ON or
OFF.

• This function is available for 24NM or shorter range se-

lection.

MOB

GAIN

SEA

RAIN

POWER

SAVE

TARGET

TRAILS

ZOOM

ALM

MODE

OFF CENT

EBL1

VRM1

BRILL

MENU

HL OFF

EBL2

VRM2

MARINE RADAR