Icom IC-V8 - Manual (Page 41)

32
8
SCAN OPERATION
■
Memory (skip) scan
Memory scan repeatedly scans all programmed memory chan-
nels, except those set as skip channels.
q
Push [C•
MR
] to select memory mode, if necessary.
• “ X ” appears.
w
Push [5•
SCAN
] after pushing [A•
FUNC
] to start the scan.
• To change the scan direction, push [ Y ] or [ Z ].
• When “dial” is assigned [VOL], rotate [VOL] to change the scan di-
rection. (p. 51)
e
Push [D•
CLR
] to stop the scan.
D
Setting skip channels
In order to speed up the scan interval, you can set memory
channels you don’t wish to scan as skip channels.
q
Push [C•
MR
] to select memory mode, if necessary.
• “ X ” appears.
w
Select a memory channel to set as a skip channel.
e Push [6•
SKIP
] after pushing [A•
FUNC
] to toggle the skip setting
ON and OFF.
• “SKIP” appears when the channels is set as a skip channel.