Icom IC-V8 - Manual (Page 58)

49
11
OTHER FUNCTIONS
‘ ‘ Initial set mode
The initial set mode is accessed at power on and allows you to set
seldom-changed settings. In this way, you can “customize” trans-
ceiver operations to suit your preference and operating style.
D D
Entering initial set mode
q Turn power on while [ ∫ ] and [ √ ] are pushed.
w
Push [ ∫ ] or [ √ ] to select the desired item.
e Rotate [VOL] to select the condition/value.
• To exit set mode, push [#•
ENT
].
D D
Key-touch beep
Turns key-touch beep emission ON and OFF.
• Default: ON
D D
Time-out timer
To prevent accidental prolonged transmission,
etc., the transceiver has a time-out timer. This
function cuts a transmission OFF after 1–30
min. of continuous transmission. This timer
can be cancelled.
• tOt.OF
: The time-out timer is turned OFF. (default)
• tOt. 1–30 : The transmission is cut OFF after the set period
elapses.
AT
POWER ON
MR
F
TX
MR
F
TX