Connecting your monitor, English – Iiyama PROLITE H2010 User Manual

Page 16

Advertising
background image

ENGLISH

ENGLISH

10 BEFORE YOU OPERATE THE MONITOR

ProLite H2010 / ProLite H1900

CONNECTING YOUR MONITOR

[Example of Connection]

A Ensure that both the computer and the monitor are switched off.
B Connect the computer to the monitor with the signal cable.(See page 31 for CONNECTOR PIN

ASSIGNMENT.)

C Connect the monitor to the USB compliant computer with the USB Cable when using the USB hub

features.

D Connect the Power Cable to the monitor first and then to the power supply.

NOTE

n The signal cables used for connecting the computer and monitor vary by the type of computer

used. An incorrect connection may cause serious damage to both the monitor and the
computer.

n For connection to Macintosh computers, contact your local iiyama dealer or regional

iiyama office for a suitable adaptor.

n Make sure you tighten the finger screws at each end of the signal cable.
n In case your computer is not compatible with USB2.0, the USB hub is compatible with

USB1.1.

n Cables are connected easily by rotating the panel 90 degrees. (See page 12 for PANEL

ROTATION.)

n Cables can be bundled together inside the cover at the back of the stand. See page 11 for

cable wiring.

USB Cable SU43 (Accessory)

Printer

Keyboard

Mouse

To DVI connector of

computer

To D-SUB connector

of computer

< Back >

DVI-D Signal Cable DV67/DV68 (Accessory)

or

DVI-A Signal Cable DV62/DV63 (Accessory)

Computer

Video Adapter OVA3-1
(Optional)

D-SUB Signal Cable (Not included)

Additional Display Monitor

Power Cable (Accessory)

Advertising
This manual is related to the following products: