Iiyama PROLITE H2010 - Manual (Page 18)

ENGLISH ENGLISH
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE
n For optimal viewing it is recommended to look at
the full face of the monitor, then adjust the monitor’s
height and angle to your own preference.
n Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
n You are able to adjust the monitor's height up to
110mm, angle up to 35 degrees right and left, 35
degrees upward.
PANEL ROTATION
A Adjust the monitor’s height to the maximum.
B Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
NOTE
n Attempting to rotate without fully
extending upward may cause
damage to stand.
n Please use attached Pivot
®
software for rotating the image
on the screen.
C Adjust the monitor’s angle to your
preference.
12 BEFORE YOU OPERATE THE MONITOR
110mm
90˚
35˚ 35˚
NOTE
n Do not touch the LCD screen when you
change the height or the angle. It may
cause damage or break the LCD screen.
n Careful attention is required not to catch
your fingers or hands when you change
the height or the angle.
For ProLite H2130
n The speaker should be retracted when
you use the monitor at lowest position
and minimum angle. If you use the monitor
without retracting the speaker, it may
cause damage because the speaker
touches to the stand.
35˚