Iiyama PROLITE H2010 - Manual (Page 19)

ENGLISH ENGLISH
Displayed while
Economy Mode is active.
Adjustment icon
Menu page
Displayed while sRGB is active.
Picture Control 'Screen OSD... Function Info...
- +
MENU SELECT
Adjustments for Brightness, Contrast, Clock, Phase and Position are saved for each signal timing.
Except for these adjustments, all other adjustments have only one setting which applies to all
signal timings.
OPERATING THE MONITOR 13
Press the Menu Button to start the On Screen Display feature. There are
additional Menu pages which can be switched by using the + / – Buttons.
B B B B B Select the Menu page which contains the adjustment icon relating to the
adjustment you want to make. Press the Menu Button again. Then, use the
+ / – Buttons to highlight the desired adjustment icon.
The On Screen Display disappears several seconds after you stop pressing the buttons while
performing an adjustment.
n
NOTE
C C C C C Press the Menu Button again. Use the + / – Buttons to make the appropriate
adjustment or setting.
n
For example, to correct for vertical position, select Menu page of Screen Control and then press
the Menu Button. Then, select (V-Position) by using the + / – Buttons.
n Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
An adjustment scale appears after you press the Menu Button. Use the + / – Buttons to change
the vertical position settings. The vertical position of the overall display should be changing
accordingly while you are doing this.
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 30. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS.
Screen Control Picture OSD... Function Info...
AUTO
V-Position
- + 10
- +
MENU ENTER
The bar shows
the progress of the
adjustment being made.
Screen Control Picture OSD... Function Info...
AUTO
V-Position
- + 50
- +
MENU EXIT
The On Screen Display disappears immediately when you press the Auto Button.
n