IBM SUREMARK TI8 - Manual (Page 149)

Table 17. MCT command definitions (continued)
DEC HEX MCT Default Min Max
54 36 TI8 and TI9 only: Reserved – IMPORTANT: Changing these values might change the
printer function.
TI3, TI4, TI6, TM6, TF6, and TI7:
Bits 9–15:
Reserved for future use, should
be left at 1
Bit 8:
v 1 = Function disabled
v 0 = DBCS page mode,
underline moved up two dot
rows
Bits 2–7:
Reserved for future use
Bit 1:
v 1 = Function disabled
v 0 = CR; paper is cut when
button is pressed for at least
120 motor steps
Bit 0:
v 1 = No mapping of user flash
storage
v 0 = Map user flash storage to
logo space
X'FFFF' X'0000' X'FFFF'
55–159 37–9F Reserved – IMPORTANT: Changing these values might damage the printer.
160 A0 User-defined impact character memory
allocation X'0001' X'0000' X'FFFF'
161 A1 User-defined thermal character memory
allocation X'0001' X'0000' X'FFFF'
162 A2 User-defined Logos X'0001' X'0000' X'FFFF'
163 A3 Predefined messages memory allocation X'0001' X'0000' X'FFFF'
164 A4 User flash storage memory allocation X'0002' X'0000' X'FFFF'
165 A5 Scanned image storage memory
allocation X'0010' X'0000' X'FFFF'
166–175 A6–AF Reserved
176 B0 Scan 1 storage template #1 predefined
location X0
177 B1 Scan 1 storage template #1 predefined
location Y0
178 B2 Scan 1 storage template #1 predefined
location DX0
179 B3 Scan 1 storage template #1 predefined
location DY0
180 B4 Scan 1 storage template #1 predefined
location X1
Updated April 2, 2009
Appendix D. EIA-232 programming information 127