IBM SUREMARK TI8 - Manual (Page 32)

The single-insert check handling feature of SureMark Models TI2, TI4, TI8, TI9,
TG4, TG8, and TG9 is provided as an added convenience when customer service
is a priority. Checks in good condition will feed reliably; damaged checks may not.
Communication interfaces
All SureMark printers can support the EIA-232 and RS-485 interfaces. Models TI3,
TI4, TI8, TI9, TG3, TG4, TG8, TG9, TM6, and TF6 can also support the USB
interface. For SureMark models that can support the USB interface, you can
upgrade installed printers from EIA-232/RS-485 to USB by ordering a USB interface
card.
EIA-232 supports 9600 and 19 200 bps baud rates and, in the Models TI8, TG8,
TI9, and TG9 only, 115 200 bps.
RS-485 operates at a 187.5 Kbps baud rate.
USB supports data rates up to 12 Mbps.
Temperature and humidity limits
Shipping -40° to 60° C (-40° to 140° F) with 5% to 100% relative humidity
including condensation, but excluding rain
Storage 0° to 60° C (32° to 140° F)
Operating 0° to 40° C (32° to 104° F) with 8% to 80% relative humidity
To allow convection cooling, ventilation holes in the covers must not be blocked.
Physical dimensions
Models TI1, TI2, TI3, TI4, TG3, and TG4 all have the same dimensions. Models TI8,
TI9, TG8, are TG9 are taller, whereas Models TF6 and TM6 have a smaller
footprint.
Models TI1, TI2, TI3, TI4, TG3, and TG4
Width 190.5 mm (7.5 in.)
Depth 255 mm (10 in.)
Height Front: 140 mm (5.5 in.), Rear: 190 mm (7.5 in.)
Weight 4.4 kg (9.6 lb) without paper
Updated April 2, 2009
10 SureMark Printers User’s Guide