Iomega G3 - Manual (Page 12)

Buz Box Connections
1. Connect the Buz box cable to the Buz card on the
back of your computer.
The longer connector on the back of the Buz card is the connector for external SCSI
devices (such as Jaz drives). A variety of SCSI devices can connect to the Buz card. See
your SCSI device documentation for proper connection. Also see the SCSI Guidelines
section in this booklet.
SCSI Connector Fifteen-Pin Connector
Buz Card Connectors
˾ Optional:
If you are connecting an external SCSI device to the Buz card, it will
be easier to connect it before connecting the Buz box fifteen-pin connector.
˾
˾ NOTE:
If your external SCSI device does not match the connector on the back
of the Buz card, purchase a quality cable converter from your dealer or call 1-800
MYSTUFF.
˾
8